Contact
Focus Us On
DOWNLOAD

The Operation Keys of Angle Shearing Machine

Table of Content [Hide]
    With the development of industrial society, a large number of mechanical equipment have been widely used. Among these, the angle shearing machine is used in the fields of automobile manufacturing, ships, elevators, electrical equipment, pipes, cookers and stainless steel products. During the manufacturing process, the operational process also needs to be paid attention to.

    1. Operators must understand the performance, correct operating procedures and the usage of the machine.

    2. Adjust the position of the hand wheel and the angle of the hand wheel in line with the angle and dimension of the drawing. And adjusting the position of the horn through the positioning scale on the surface of workpieces.

    3. In the production process, the operator must strictly operate according to the drawings and follow the requirements of the quality control process.

    4. In production, operators should first check whether the dimensions of the material are accurate, confirm it correct, and then operate according to the requirements of the drawings.

    5. The operator will introspect each first piece that cut from the blocks, and then notifies the inspector to verify the correctness. The operator is able to batch operate. In the process of operation, except the inspectors do sampling, operators should also test from time to time to prevent batch errors.

    6. In the production process, the operator must carry out the plate finishing and place the whole plate according to the project. And make the light to prevent the surface scratches.

    7. After the horn is completed, turn off the power switch, tidy up the table and the health condition of its own body, keep the equipment clean and clean the floor box.

    8. Work equipment cannot clean up waste, lubricating machine and so on.

    9. When many people operate a device at the same time, they must have a clear division of labor and work together.

    10. It is strictly prohibited stamping thick plates, super hard or welding scar, welding, dispersion and other defects, so as not to damage the machine edge.

    11. In the work, if the machine has abnormal sound, please stop immediately and check until detecting the cause. restart the work after the troubleshooting. If the operator cannot handle it, please notify the maintenance personnel to deal with it in time.

    12. Maintain the shearing machine regularly according to the requirements of the equipment maintenance system.
    References
    Related News
    • Stainless Steel Duct And Pipe Making Machine

      Stainless Steel Duct And Pipe Making Machine

      July 25, 2019Stainless steel pipes can be roughly divided into stainless steel round pipes, rectangular pipes, square pipes, elliptical pipes, flat-headed pipes, plum-blossom pipes and so on, according to their di...view
    • Introduction of Corner Code Assembly Machine

      Introduction of Corner Code Assembly Machine

      June 27, 2019Corner code assembly machine is mainly used for flange corner code assembly at both ends of rectangular common plate square pipe. It is the supporting equipment of rectangular square pipe production l...view
    • Cnc Angle Steel Flange Production Line

      Cnc Angle Steel Flange Production Line

      June 27, 2019The cnc angle steel flange production line consists of eight parts. Horizontal feeding part, turnover feeding part, longitudinal feeding path part, feeding trolley, main engine part (one typing unit, ...view
    • Application of Square Duct Machine

      Application of Square Duct Machine

      July 25, 2019Stainless steel square duct is a hollow strip of steel, because the section is square, so it is called square duct. A large number of pipelines are used to transport fluids, such as petroleum, natural...view
    • Changes in the State of Technology of Spiral Tube Forming Machine

      Changes in the State of Technology of Spiral Tube Forming Machine

      July 30, 2018The spiral tube forming machine will be affected by various factors in use. These factors include:1. The function of the surrounding medium energy, including the function of operators, repairmen, and ...view
    • The Function of Portable Duct Seamer Machine

      The Function of Portable Duct Seamer Machine

      April 11, 2019Portable duct seamer machine is suitable for quick seam closure of square ventilation ducts. It has a smooth appearance, strong versatility, improves the quality of seam closure of ducts, reduces labo...view